Limeijia Sparkling Stone Artistic Coating Series includes Velvet Silk Coating, Lustrous Stone Coating, and Shimmering Stone Coating. Velvet Silk Coating uses fine sand for a smooth surface with rich flat textures; Lustrous Stone Coating uses medium sand for a tactile textured finish; and Shimmering Stone Coating uses coarse sand for a highly pronounced tactile texture. Products of this series is water-based artistic coatings designed to create luxurious, shimmering, and metallic effects on interior walls. It features a pearl-like luster and silk-like appearance, with visual effects that vary under different angles and lighting conditions. Different application methods yield varying effects. The coating is smooth to the touch, with intricate textures, resulting in high-end artistic finishes.

Product Introduction

Applications

The product is widely used for thedecoration and protection of interior walls in villas, residences, guesthouses,hotels, museums, art galleries, libraries, concert halls, office buildings,international schools, and commercial plazas.

Packaging Specifications

5kg/barrel.

Supporting Coatings and Tools

Supporting Coatings and Usage

Special Artistic Primer: Theoreticalconsumption is 8-9㎡/kg (one coat). Actual consumptionmay vary depending on wall roughness or application methods.

Background Coating : Theoreticalconsumption is 6.5-7.5㎡/kg (one coat). Actualconsumption may vary depending on wall roughness or application methods.

Sparkling Stone Artistic Coating:Theoretical consumption is 2-4㎡/kg (1-2 coats). Actualconsumption may vary depending on the material, wall roughness, or applicationmethods.

Finish Coat Varnish: Theoreticalconsumption is 6-7㎡/kg (one coat). Actual consumptionmay vary depending on wall roughness or application methods.

Note: We will provide and confirm thenecessary coatings for your project based on your desired results.

Application Tools

Mixing sticks, sanders, cotton rollers,wool rollers, brushes, seaweed sponges, masking tape, protective film, etc.(Tools should be prepared according to project requirements).

Application

Wall Inspection and EnvironmentalRequirements Before Application

The wall to be coated should already have aputty layer applied, with a firm, clean surface that is free of cracks,peeling, dust, hollowing, lime bursts, poorly adhered old coatings, and oilstains. The wall moisture content should be less than 5%.

The ambient temperature should be above8°C, with a relative humidity below 75% RH.

Sanded Texture Effect Application Steps –(Velvet Silk Coating)

Roll-coat one layer of special artisticprimer.

Use a cotton roller to apply one coat ofVelvet Silk Coating. Once completely dry, roll-coat a second layer.

While the second coat of Velvet SilkCoating is surface-dry, use a sanding tool to create the desired texture.

Allow a curing period of 7 days