Limeijia Tintable Primer is a high-quality, versatile, water-based sealing and anti-alkaline coating. The product provides excellent sealing properties, effectively preventing alkaline substances from seeping out of the wall and damaging the decorative surface coating. It also prevents moisture penetration, offers strong adhesion, and features mold-resistant and anti-alkaline functions. The primer provides deep-level wall protection, reducing issues such as peeling, mold, uneven color, and yellowing, which are common wall problems.
Product Introduction
Packaging Specifications of Tintable Primer
25kg/barrel (20L cylindrical plasticbarrel: height 38cm, upper diameter 30.9cm, lower diameter 29.8cm).
Precautions During Application
Before large-scale application, test-coat1-2㎡ on the wall to confirm that the color and effectmatch the standard sample before proceeding.
For large-scale applications, perform linedivisions and use suspended platforms for construction to avoid pole markscaused by scaffolding.
It is recommended that the same batch ofpaint be applied by the same team of workers on the same wall to ensureconsistent surface effects and avoid uneven finishes.
Stir the product thoroughly before use. Userollers and brushes for application. Elastic embossing coating does not requiredilution.
Application is strictly prohibited when theambient temperature is below 8°C, the relative humidity exceeds 70% RH, orduring rainy, foggy, or windy weather, as this will affect the formation of thecoating.
During breaks or after application, sealany unused paint tightly to prevent it from drying out in the barrel. Cleantools and clothing promptly; otherwise, dried paint will be difficult toremove.
It is recommended to reserve 3-5 barrels ofmaterial for future maintenance.
Coating Drying Time – (Under Conditions ofAbove 8°C and Relative Humidity Below 70% RH)
Primer: Drying time is at least 4 hours.Apply latex paint only after the primer is completely dry.
Storage, Transportation, and Disclaimer
Storage and Transportation
Transportation: The product isnon-flammable, non-explosive, safe, non-toxic, and harmless. Avoid excessivestacking.
Storage: Store in a sealed container in adry, cool place at a temperature of 5-30°C. Avoid frost and direct sunlight.
Disclaimer
If the above instructions are violated,resulting in forced application or improper operation, issues such as peeling,chalking, cracking, efflorescence, fading, and other unforeseen coating defectsmay occur. In such cases, our company and distributors will not bearresponsibility for quality issues or economic losses caused. Refer to theproduct certificate for the product’s shelf life, quality standards, anddilution ratio.
Product delivery
