Limeijia Sanded Background Coating is an intermediate coating used as a background color for decorative effects in interior and exterior wall applications. It is composed of water-based composite emulsions, additives, fillers, and other materials. It features excellent adhesion, strong bonding, crack resistance, and good water resistance. The product combines waterproof properties with high elasticity, effectively preventing coating cracking and water infiltration into the wall.
ProductIntroduction
PackagingSpecifications of Sanded Background Coating
25kg/barrel(20L cylindrical plastic barrel: height 38cm, upper diameter 30.9cm, lowerdiameter 29.8cm).
PrecautionsDuring Application
Beforelarge-scale application, test-coat 1-2㎡ on the wall to confirm that thecolor and effect match the standard sample before proceeding.
Forlarge-scale applications, perform line divisions and use suspended platformsfor construction to avoid pole marks caused by scaffolding.
Itis recommended that the same batch of paint be applied by the same team ofworkers on the same wall to ensure consistent surface effects and avoid unevenfinishes.
Stirthe product thoroughly before use. Use rollers and brushes for application.
Applicationis strictly prohibited when the ambient temperature is below 8°C, the relativehumidity exceeds 70% RH, or during rainy, foggy, or windy weather, as this willaffect the formation of the coating.
Duringbreaks or after application, seal any unused paint tightly to prevent it fromdrying out in the barrel. Clean tools and clothing promptly; otherwise, driedpaint will be difficult to remove.
Itis recommended to reserve 3-5 barrels of material for future maintenance.
CoatingDrying Time – (Under Conditions of Above 8°C and Relative Humidity Below 70%RH)
BackgroundCoating: Drying time is at least 4 hours. Apply the next layer only after thebackground coating is completely dry.
Storage,Transportation, and Disclaimer
Storageand Transportation
Transportation:The product is non-flammable, non-explosive, safe, non-toxic, and harmless.Avoid excessive stacking.
Storage:Store in a sealed container in a dry, cool place at a temperature of 5-30°C.Avoid frost and direct sunlight.
Disclaimer
Ifthe above instructions are violated, resulting in forced application orimproper operation, issues such as peeling, chalking, cracking, efflorescence,fading, and other unforeseen coating defects may occur. In such cases, ourcompany and distributors will not bear responsibility for quality issues oreconomic losses caused. Refer to the product certificate for the product’sshelf life, quality standards, and dilution ratio.
Productdelivery
