Limeijia Sanded Background Coating is an intermediate coating used as a background color for decorative effects in interior and exterior wall applications. It is composed of water-based composite emulsions, additives, fillers, and other materials. It features excellent adhesion, strong bonding, crack resistance, and good water resistance. The product combines waterproof properties with high elasticity, effectively preventing coating cracking and water infiltration into the wall.
Product Introduction
Packaging Specifications of SandedBackground Coating
25kg/barrel (20L cylindrical plasticbarrel: height 38cm, upper diameter 30.9cm, lower diameter 29.8cm).
Precautions During Application
Before large-scale application, test-coat1-2㎡ on the wall to confirm that the color and effectmatch the standard sample before proceeding.
For large-scale applications, perform linedivisions and use suspended platforms for construction to avoid pole markscaused by scaffolding.
It is recommended that the same batch ofpaint be applied by the same team of workers on the same wall to ensureconsistent surface effects and avoid uneven finishes.
Stir the product thoroughly before use. Userollers and brushes for application.
Application is strictly prohibited when theambient temperature is below 8°C, the relative humidity exceeds 70% RH, orduring rainy, foggy, or windy weather, as this will affect the formation of thecoating.
During breaks or after application, sealany unused paint tightly to prevent it from drying out in the barrel. Cleantools and clothing promptly; otherwise, dried paint will be difficult toremove.
It is recommended to reserve 3-5 barrels ofmaterial for future maintenance.
Coating Drying Time – (Under Conditionsof Above 8°C and Relative Humidity Below 70% RH)
Background Coating: Drying time is at least4 hours. Apply the next layer only after the background coating is completelydry.
Storage, Transportation, and Disclaimer
Storage and Transportation
Transportation: The product isnon-flammable, non-explosive, safe, non-toxic, and harmless. Avoid excessivestacking.
Storage: Store in a sealed container in adry, cool place at a temperature of 5-30°C. Avoid frost and direct sunlight.
Disclaimer
If the above instructions are violated,resulting in forced application or improper operation, issues such as peeling,chalking, cracking, efflorescence, fading, and other unforeseen coating defectsmay occur. In such cases, our company and distributors will not bearresponsibility for quality issues or economic losses caused. Refer to theproduct certificate for the product’s shelf life, quality standards, anddilution ratio.
Product delivery
